Order online or Call   +44 1707 282710

Kala Laminators

Kala offer a range of cold or hot & cold laminators, up to 83″ (2.1m) wide, to meet most of the digital print finishing requirements, printed using water-based, solvent, eco-solvent, UV, screen-printing, offset, laser… inks with the guarantee of perfect results. All models are universal and will accept all types of common lamination and encapsulation films.


Kala Starter

The Kala Starter is an entry-level cold, wide format laminator which is ideally suited to the requirements of the sign-maker, photo labs, printers and any company with a need for low to mid volume finishing.

The range is available in 108cm (43″), 140cm (55″) and 160cm (63″) widths and all are capable of handling rolls up to 100m in length.  An optional stand is available.

 
 
 
 

Kala Baltic

The Baltic 1080 (42.5″) and 1400 (55″) offer single-sided lamination, simultaneous lamination and adhesive mounting and board mounting up to 25mm (1″) thick.

As an entry-level model, Baltic is a cost saver.  It is the perfect solution for those who want to integrate lamination in to their output process on a low budget.  Suitable applications include:

  • Photography
  • Indoor signs
  • Display material

Kala Mistral

The Mistral 1650 (65″) and 2100 (83″) offer single-sided lamination, simultaneous lamination and adhesive mounting, encapsulation and board mounting up to 50mm (2″) thick.

The Mistral laminators are high-volume machines with heat assisted top rollers from 30-60°C.  The 2100 easily accomodates 2m wide material so is the perfect solution for the high volume user with frequent demands for finishing up to 2m wide.

 

 


Kala Atlantic

The Atlantic 1080 (42.5″) and 1650 (65″) offer single-sided lamination, simultaneous lamination and adhesive mounting, encapsulation and board mounting up to 25mm (1″) for the 1080 and 50mm (2″) for the 1650.

The Atlantic laminators are high volume, full hot and cold machines up to 140°C.  These laminators are the ideal solution for production environments that require the flexibility for full hot and cold control over their finishing requirments.

 

 


Kala Sirocco

The Sirocco 1080 (42.5″) and 16000 (63″) offer single-sided lamination, simultaneous lamination and adhesive mounting, encapsulation (1600 only) and board mounting up to 25mm (1″) thick.

The Sirocco range are medium duty machines with hot and cold top and bottom rollers to 160°C.  These laminators are the ideal solution for users with low to mid volume finishing requirements.

 

 


Kala Arkane

The Arkane 1650 (65″) offers single-sided lamination, simultaneous lamination and adhesive mounting, encapsulation and board mounting up to 50mm (2″) thick.

The Arkane is a high-volume machine with heated top roller up to 140°C.  The Arkane differs from the Mistral range only in that the temperature of the top roller goes up to 140°C, so users would choose this model:

  • To use less expensive thermal film on one side for short term protection
  • To use special types of thermal laminating materials for signage
  • To use cold mounting films and thermal polyester films for budget applications